| |
|
|
| |
| |
| |
Machine Specification |
| Machine model : PSP 3D 06T, CNC 3D wire bending machine with indexing tool changer, |
| |
MACHINE CAPACITY |
Wire dia. 2.7 mm to 6.0 mm in mild steel max. wire tensile at wire dia. 600 N/mm2.
Wire dia. 2.7 mm to 5.0 mm in stainless steel max. wire tensile at wire dia. 525 N/mm2. |
| |
X- AXIS FEEDING |
- Feeder axis wire feed resolution :- +/- 0.006 mm.
- Max. wire feed speed :- 80 m/min.
- Feed Accuracy in mm :- 0.01 mm.
- Feeding :- Unlimited
|
| |
Y- AXIS BENDING |
- Bender axis wire bend resolution :- +/- 0.005 mm.
- Max. wire bending speed :- 700 degree/ sec.
- Bend Accuracy in degree :- 0.09 degree.
- Max. Angle of Bending :- 180 degree.( Bend accuracy depend upon wire tensile strength)
|
| |
Z- AXIS ROTATING |
- Rotator axis wire resolution :- +/- 0.06 mm.
- Max. Head rotating speed :- 480 degree/ sec.
- Feed Accuracy in mm :- 0.01 mm.
- Max. Angle of rotation :- 180 to – 180 degree.
|
| |
PRODUCTION RATE PER MINUTE |
| This depends on |
: |
The number of feeds and bends, |
| |
: |
The amplitude of movements, |
| |
: |
The wire tensile strength, |
| |
: |
The effect of whip, |
| |
: |
Total length of components, |
| On the average |
: |
0.7 to 1.2 seconds per bend. |
|
| |
SET UP TIME |
| Same wire diameter |
: |
02 min. |
| Change feed roller, wire guide, tools |
: |
20 min. |
| Installed power capacity |
: |
15 KW. |
| Air pressure/ consumption |
: |
6 Bar / 1.5 SCFM. |
|
| |
WEIGHT & DIMENSIONS |
| Height, width & depth |
: |
1500 * 900 * 920 mm. |
| Weight in kgs. |
: |
2250 kgs. |
|
| |
One basic cnc wire bending machine as described above , including : |
- PSP 3D 06T CNC 3D Wire Bending Machine.
- 5 sets of wire dia. guide, tooling, rollers.
- One wire straightener type ST-09/2, wire dia. 2.5 mm to 6 mm.
- One wire decoiler unit D-500 with powered controlled by VFD.
|
